Skip NavigationView Sitemap

Outdoor cables (halogenfree)

A-H(St)HSO Bd Si mtp

A-H(St)HSO Bd Si mtp

in resemblance to DIN VDE 0815
APPLICATION

This halogen-free, flame-resistant cable is used where increased fire protection of persons, material goods and buildings is required. It serves for signal transmission in communication systems with fixed installation, especially for use outdoors in drains, pipes and sand. Not approved for power installation. Appropriate for water installation.

CONSTRUCTION
  • Conductor: copper solid, bare (Ø 0.8 mm)
  • Core insulation: halogen free compound
  • Core stranding: 2 cores to pair, 4 pairs to unit, units in layers; 2 x 2 as star quad
  • Lapping: min. 2 layers plastic foil
  • Shield: tinned drain wire (Ø 0.8 mm); plastic-laminated aluminium foil
  • Outer sheath: Inner layer: halogen free compound; Outer layer: halogen free special compound; colour: black RAL 9005
BEHAVIOUR UNDER FIRE CONDITIONS
  • Zero halogen, non corrosive gases: IEC 60754-2, DIN EN 50267
  • Flame retardant: IEC 60332-1-2, DIN EN 60332-1-2
  • Fire retardant: IEC 60332-3-22 / 24, DIN EN 60332-3-22 / 24
  • Smoke density: IEC 61034, DIN EN 61034

A-H(St)HCHSOT Bd Si mtp

A-H(St)HCHSOT Bd Si mtp

in resemblance to DIN VDE 0815
APPLICATION

This halogen-free, flame-resistant cable is used where increased fire protection of persons, material goods and buildings is required. It serves for signal transmission in communication systems with fixed installation. Not approved for power installation. Termite resistant. Appropriate for water installation.

CONSTRUCTION
  • Conductor: copper, solid, bare (Ø 0.8 mm)
  • Core insulation: halogen-free compound
  • Core stranding: 2 cores to pair, 4 pairs to unit, units in layers; 2 x 2 as star quad
  • Lapping: min. 2 layers of plastic foil
  • Shield: tinned drain wire (Ø 0.8 mm); plastic-laminated aluminium foil
  • Sheath: halogen-free compound
  • Screen: tinned copper wire braid (Ø 0.2 mm); optical coverage approx. 80 %
  • Outer sheath: layer 1: halogen-free compound layer 2: special halogen-free compound; termite protected; colour: black RAL 9005
BEHAVIOUR UNDER FIRE CONDITIONS
  • Zero halogen, non corrosive gases: IEC 60754-2, DIN EN 50267
  • Flame retardant: IEC 60332-1-2, DIN EN 60332-1-2
  • Fire retardant: IEC 60332-3-22 / 24, DIN EN 60332-3-22 / 24
  • Smoke density: IEC 61034, DIN EN 61034

A-H(St)HCHSHSOT Bd Si mtp

A-H(St)HCHSHSOT Bd Si mtp

in resemblance to DIN VDE 0815
APPLICATION

This halogen-free, flame-resistant cable is used where increased fire protection of persons, material goods and buildings is required. It serves for signal transmission in communication systems with fixed installation. Not approved for power installation. Termite resistant and rodent proof. Appropriate for water installation.

CONSTRUCTION
  • Conductor: copper, solid, bare (Ø 0.8 mm)
  • Core insulation: halogen-free compound
  • Core stranding: 2 cores to pair, 4 pairs to unit, units in layers; 2 x 2 as star quad
  • Lapping: min. 2 layers of plastic foil
  • Shield: tinned drain wire (Ø 0.8 mm); plastic-laminated aluminium foil
  • Sheath 1: halogen-free compound
  • Screen: tinned copper wire braid (Ø 0.2 mm); optical coverage approx. 80 %
  • Sheath 2: halogen-free compound
  • Armouring: galvanized steel wire braid (Ø 0.24 mm); optical coverage > 60 %
  • Outer sheath: layer 1: halogen-free compound layer 2: special halogen-free compound; termite protected; colour: black RAL 9005
BEHAVIOUR UNDER FIRE CONDITIONS
  • Zero halogen, non corrosive gases: IEC 60754-2, DIN EN 50267
  • Flame retardant: IEC 60332-1-2, DIN EN 60332-1-2
  • Fire retardant: IEC 60332-3-22 / 24, DIN EN 60332-3-22 / 24
  • Smoke density: IEC 61034, DIN EN 61034

A-H(St)HCHSHSOT Bd Si mtp

A-H(St)HCHSHSOT Bd Si mtp

in resemblance to DIN VDE 0815
APPLICATION

This halogen-free, flame-resistant cable is used where increased fire protection of persons, material goods and buildings is required. It serves for signal transmission in communication systems with fixed installation. Not approved for power installation. Termite resistant and rodent proof. Appropriate for water installation.

CONSTRUCTION
  • Conductor: copper, solid, bare (Ø 0.8 mm)
  • Core insulation: halogen-free compound
  • Core stranding: 2 cores to pair, 4 pairs to unit, units in layers; 2 x 2 as star quad
  • Lapping: min. 2 layers of plastic foil
  • Shield: tinned drain wire (Ø 0.8 mm); plastic-laminated aluminium foil
  • Sheath: halogen-free compound
  • Weir / Rodent protection: galvanized steel shield (Ø 0.9 mm or 1.4 mm); optical coverage approx. 80 %
  • Outer sheath: layer 1: halogen-free compound layer 2: special halogen-free compound; termite protected; colour: black RAL 9005
BEHAVIOUR UNDER FIRE CONDITIONS
  • Zero halogen, non corrosive gases: IEC 60754-2, DIN EN 50267
  • Flame retardant: IEC 60332-1-2, DIN EN 60332-1-2
  • Fire retardant: IEC 60332-3-22 / 24, DIN EN 60332-3-22 / 24
  • Smoke density: IEC 61034, DIN EN 61034

AJ-HCHDHSO Bd Si Cu16 mtp

AJ-HCHDHSO Bd Si Cu16 mtp

in resemblance to DIN VDE 0815
APPLICATION

This halogen-free, flame-resistant cable is used where increased fire protection of persons, material goods and buildings is required. It serves for signal transmission in communication systems with fixed installation. Not approved for power installation. Appropriate for water installation.

CONSTRUCTION
  • Core: copper solid, bare (Ø 0.8 mm)
  • Core insulation: halogen free compound
  • Core stranding: 2 cores to pair, 4 pairs to unit, units in layers; 2 x 2 as star quad
  • Lapping: plastic foil
  • Screen: tinned copper wire braid (Ø 0.2 mm)
  • Sheath: halogen free compound
  • Weir / Screen: cross section 16 mm²; surrounded with 16 bare copper wires (Ø 1.13 mm); lapping with plastic foil
  • Outer sheath: Inner layer: halogen free compound; Outer layer: halogen free special compound; colour: black RAL 9005
BEHAVIOUR UNDER FIRE CONDITIONS
  • Zero halogen, non corrosive gases: IEC 60754-2, DIN EN 50267
  • Flame retardant: IEC 60332-1-2, DIN EN 60332-1-2
  • Fire retardant: IEC 60332-3-22 / 24, DIN EN 60332-3-22 / 24
  • Smoke density: IEC 61034, DIN EN 61034

A-LIH(St)HSO Bd Si mtp

A-LIH(St)HSO Bd Si mtp

in resemblance to DIN VDE 0815
APPLICATION

This halogen-free, flame-resistant cable is used where increased fire protection of persons, material goods and buildings is required. It serves for signal transmission in communication systems with fixed installation. Not approved for power installation. Appropriate for water installation.

CONSTRUCTION
  • Conductor: copper strand, bare; 7 x 0.3 mm = 0.5 mm² (Ø 0.9 mm)
  • Core insulation: halogen free compound
  • Core stranding: 2 cores to pair, 4 pairs to unit, units in layers; 2 x 2 as star quad
  • Lapping: min. 2 layers plastic foil
  • Shield: tinned drain wire 0.5 mm²; plastic-laminated aluminium foil
  • Outer sheath: Inner layer: halogen free compound; Outer layer: halogen free special compound; colour: black RAL 9005
BEHAVIOUR UNDER FIRE CONDITIONS
  • Zero halogen, non corrosive gases: IEC 60754-2, DIN EN 50267
  • Flame retardant: IEC 60332-1-2, DIN EN 60332-1-2
  • Fire retardant: IEC 60332-3-22 / 24, DIN EN 60332-3-22 / 24
  • Smoke density: IEC 61034, DIN EN 61034
+49 (0)7151 / 60 68 70
Back to top