Skip Navigation View Sitemap

Indoor cables (halogen-free)

JE-LIH(St)HSO Bd Si mtp Fca

JE-LIH(St)HSO Bd Si mtp Fca
in resemblance to DIN VDE 0815
Application

This halogen-free, flame-resistant cable is used where increased fire protection of persons, material goods and buildings is required. It serves for signal transmission in communication systems with fixed installation. Not approved for power installation. Appropriate for water installation.

Construction
  • Conductor: copper strand, bare; 7 x 0.3 mm = 0.5 mm² (Ø 0.9 mm)
  • Core insulation: halogen-free compound
  • Core stranding: 2 cores to pair, 4 pairs to unit, units in layers; 2 x 2 as star quad
  • Lapping: plastic foil
  • Shield: tinned drain wire 0.5 mm²; plastic-laminated aluminium foil
  • Outer sheath: layer 1: halogen-free compound layer 2: special halogen-free compound, colour: pebble grey RAL 7032 or blue RAL 5015
Behaviour under fire conditions
  • Zero halogen, non corrosive gases: IEC 60754-2, DIN EN 50267
  • Flame retardant: IEC 60332-1-2, DIN EN 60332-1-2
  • Fire retardant: IEC 60332-3-22 / 24, DIN EN 60332-3-22 / 24
  • Smoke density: IEC 61034, DIN EN 61034

JE-LIHCHSOT Bd Si mtp

JE-LIHCHSOT Bd Si mtp in resemblance to DIN VDE 0815
Application

This halogen-free, flame-resistant cable is used where increased fire protection of persons, material goods and buildings is required. It serves for signal transmission in communication systems with fixed installation. Not approved for power installation. Termite resistant. Appropriate for water installation.

Construction
  • Conductor: copper strand, bare; 7 x 0.3 mm = 0.5 mm² (Ø 0.9 mm)
  • Core insulation: halogen-free compound
  • Core stranding: 2 cores to pair, 4 pairs to unit, units in layers; 2 x 2 as star quad
  • Lapping: plastic foil
  • Screen: tinned copper wire braid (Ø 0.2 mm)
  • Outer sheath: layer 1: halogen-free compound layer 2: special halogen-free compound; termite protected; colour: pebble grey RAL 7032 or blue RAL 5015
Behaviour under fire conditions
  • Zero halogen, non corrosive gases: IEC 60754-2, DIN EN 50267
  • Flame retardant: IEC 60332-1-2, DIN EN 60332-1-2
  • Fire retardant: IEC 60332-3-22 / 24, DIN EN 60332-3-22 / 24
  • Smoke density: IEC 61034, DIN EN 61034

JE-LIHCHSHSOT Bd Si mtp

JE-LIHCHSHSOT Bd Si mtp
in resemblance to DIN VDE 0815
Application

This halogen-free, flame-resistant cable is used where increased fire protection of persons, material goods and buildings is required. It serves for signal transmission in communication systems with fixed installation. Not approved for power installation. Termite resistant and rodent proof. Appropriate for water installation.

Construction
  • Conductor: copper strand, bare; 7 x 0.3 mm = 0.5 mm² (Ø 0.9 mm)
  • Core insulation: halogen-free compound
  • Core stranding: 2 cores to pair, 4 pairs to unit, units in layers; 2 x 2 as star quad
  • Lapping: plastic foil
  • Screen: tinned copper wire braid (Ø 0.2 mm)
  • Sheath: halogen free compound
  • Armouring: galvanized steel wire braid (Ø 0.24 mm); optical coverage > 60 %
  • Outer sheath: layer 1: halogen-free compound layer 2: special halogen-free compound; termite protected; colour: pebble grey RAL 7032 or blue RAL 5015
Behaviour under fire conditions
  • Zero halogen, non corrosive gases: IEC 60754-2, DIN EN 50267
  • Flame retardant: IEC 60332-1-2, DIN EN 60332-1-2
  • Fire retardant: IEC 60332-3-22 / 24, DIN EN 60332-3-22 / 24
  • Smoke density: IEC 61034, DIN EN 61034
Back to top