Skip NavigationView Sitemap

PVC

NYY-O/J 0.6/1 kV

NYY-O/J 0.6/1 kV

acc. to VDE 0276-603
APPLICATION

Power cables for energy supply are installed outdoors, underground, in water, in concrete, indoors, in cable ducts, in power stations, for industry and distribution boards as well as in subscriber networks, where mechanical damage is not to be expected.

CONSTRUCTION
  • Conductor: copper, bare, single-wire or multi-wire
  • Core insulation: PVC DIV 4
  • Core identification: colours acc. to DIN VDE 0293
  • Core stranding: cores twisted to layers
  • Outer sheath: PVC DMV 5 flame retardant; colour: black
BEHAVIOUR UNDER FIRE CONDITIONS
  • Flame retardant: VDE 0482-332-1-2/IEC 60332-1

NYY-OZ/JZ 0.6/1 kV

NYY-OZ/JZ 0.6/1 kV

acc. to VDE 0276-603
APPLICATION

Power cables for energy supply are installed outdoors, underground, in water, in concrete, indoors, in cable ducts, in power stations, for industry and distribution boards as well as in subscriber networks, where mechanical damage is not to be expected.

CONSTRUCTION
  • Conductor: copper, bare, single-wire or multi-wire
  • Core insulation: PVC DIV 4
  • Core identification: colours acc. to DIN VDE 0293
  • Core stranding: cores twisted to layers
  • Outer sheath: PVC DMV 5 flame retardant; colour: black
BEHAVIOUR UNDER FIRE CONDITIONS
  • Flame retardant: VDE 0482-332-1-2/IEC 60332-1

NYCY 0.6/1 kV

NYCY 0.6/1 kV

acc. to VDE 0276
APPLICATION

Power cables for energy supply are used for industry and distribution boards, power stations, house connecting boxes, street lighting as well as a control cable for the transmission of control impulses and test data. Anywhere where increased electrical and mechanical protection is required. These cables are installed outdoors, underground, in water, in concrete, indoors and in cable ducts.

CONSTRUCTION
  • Conductor: copper, bare, single-wire or multi-wire
  • Core insulation: PVC DIV 4
  • Core identification: colours acc. to DIN VDE 0293
  • Core stranding: cores twisted to layers
  • Concentric conductor: copper wires, stranded with cu-tape counter helix
  • Outer sheath: PVC DMV 5 flame retardant; colour: black
BEHAVIOUR UNDER FIRE CONDITIONS
  • Flame retardant: VDE 0482-332-1-2/IEC 60332-1

NYCWY 0.6/1 kV

NYCWY 0.6/1 kV

acc. to VDE 0276-603
APPLICATION

Power cables for energy supply are used for industry and distribution boards, power stations, house connecting boxes, street lighting as well as a control cable for the transmission of control impulses and test data. Anywhere where increased electrical and also mechanical protection is required. These cables are installed outdoors, underground, in water, in concrete, indoors and in cable ducts.

CONSTRUCTION
  • Conductor: copper, bare, single-wire or multi-wire
  • Core insulation: PVC DIV 4
  • Core identification: colours acc. to DIN VDE 0293
  • Core stranding: cores twisted to layers
  • Concentric conductor: copper wires, wave form (ceander), with cu- tape counter helix
  • Outer sheath: PVC DMV 5 flame retardant; colour: black
BEHAVIOUR UNDER FIRE CONDITIONS
  • Flame retardant: VDE 0482-332-1-2/IEC 60332-1

NYYSYö-FR-O/J 0.6/1 kV

NYYSYö-FR-O/J 0.6/1 kV

in resemblance VDE 0276-603
APPLICATION

Power cables for energy supply are installed outdoors, underground, in water, in concrete, indoors, in cable ducts, in power stations, for industry and distribution boards as well as in subscriber networks, where mechanical damage is not to be expected. Resistant to impact of oils.

CONSTRUCTION
  • Conductor: copper, bare, single-wire or multi-wire
  • Core insulation: PVC acc. to VDE 0207
  • Core identification: colours acc. to DIN VDE 0293
  • Core stranding: cores twisted to layers
  • Sheath: PVC
  • Armouring: galvanized steel wire braid (Ø 0.2 mm); optical coverage approx. 80 %
  • Outer sheath: PVC-FR; oil-resistant acc. DIN EN 60811-404, VDE 0473-811-404 edition 2012; colour: black
BEHAVIOUR UNDER FIRE CONDITIONS
  • Fire retardant: IEC 60332-3-22 / 24, DIN EN 60332-3-22 / 24
  • Low smoke and fume

2XY-O/J (R2V) 0.6/1kV

2XY-O/J (R2V) 0.6/1kV

acc. to NF C 32-321, IEC 60502
APPLICATION

For use on industrial sites. Particularly suited to cases of high operating temperatures and when high resistance to UV radiation and atmospheric agents is required. Good resistance to low temperatures and chemical agents. Can be used without additional mechanical protection in the open air, fixed to walls or in channels, inside gangways or in empty spaces in constructions in general. Can be laid underground with mechanical protection constructed from slabs, tiles, or bricks.

CONSTRUCTION
  • Conductor: copper, bare, single-wire or multi-wire
  • Core insulation: XLPE (cross-linked polyethylene)
  • Core identification: colours acc. to DIN VDE 0293
  • Core stranding: cores twisted to layers
  • Outer sheath: PVC; colour: black;
    POINT DE VUE (coloured stripes): 1.5 mm² pink, 2.5 mm² yellow, 4 mm² purple, 6 mm² blue, 10 mm² brown, 16 mm² grey

BEHAVIOUR UNDER FIRE CONDITIONS
  • Flame retardant: VDE 0472-804/IEC 60332-1

N2XY-O/J 0.6/1kV

N2XY-O/J 0.6/1kV

acc. to VDE 0276-603
APPLICATION

For indoor and outdoor installation, in the ground, for power stations, industry and distribution boards or subscriber networks, where protection against contact voltage is required in the case of mechanical damage. (See DIN VDE 0298-1.) The core insulation of XLPE allows a higher operating temperature than a comparable cable with PVC core insulation.

CONSTRUCTION
  • Conductor: copper, bare, single-wire or multi-wire
  • Core insulation: XLPE (cross-linked polyethylene)
  • Core identification: colours acc. to DIN VDE 0293
  • Core stranding: cores twisted to layers
  • Outer sheath: PVC; colour: black

N2XCY 0.6/1kV

N2XCY 0.6/1kV

acc. to VDE 0276-603
APPLICATION

For indoor and outdoor installation, in the ground, for power stations, industry and distribution boards or subscriber networks, where protection against contact voltage is required in the case of mechanical damage. (See DIN VDE 0298-1.) The core insulation of XLPE allows a higher operating temperature than a comparable cable with PVC core insulation.

CONSTRUCTION
  • Conductor: copper, bare, single-wire or multi-wire
  • Core insulation: XLPE (cross-linked polyethylene)
  • Core identification: colours acc. to DIN VDE 0293
  • Core stranding: concentric
  • Concentric Conductor: copper
  • Outer sheath: PVC; colour: black

N2XY-FR-O/J 0.6/1kV

N2XY-FR-O/J 0.6/1kV

acc. to VDE 0276-603
APPLICATION

For indoor and outdoor installation, in the ground, for power stations, industry and distribution boards or subscriber networks, where protection against contact voltage is required in the case of mechanical damage. (See DIN VDE 0298-1.) The core insulation of XLPE allows a higher operating temperature than a comparable cable with PVC core insulation.

CONSTRUCTION
  • Conductor: copper, bare, single-wire or multi-wire
  • Core insulation: XLPE (cross-linked polyethylene)
  • Core identification: colours acc. to DIN VDE 0293
  • Core stranding: cores twisted to layers
  • Outer sheath: PVC-FR; colour: black
BEHAVIOUR UNDER FIRE CONDITIONS
  • Fire retardant: IEC 60332-3-24, DIN EN 60332-3-24
  • Low smoke and fume
+49 (0)7151 / 60 68 70
Back to top